Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

轴流风扇叶片端导叶作用的研究

本文采用数值方法研究了叶片端导叶对轴流风扇性能的影响。通过与普通开式轴流风扇比较,分析了叶片端导叶对内部流动作用的机理.数值计算结果表明:叶片端导叶的安装位置将影响轴流风扇气动效率,安装叶片端导叶不能提高风扇静压升,但是在压力面安装时能有效地减小风扇叶顶泄漏流与主流的掺混损失;在设计流量下,压力面安装叶片端导叶使泄漏涡的作用范围较小,涡核更靠近吸力面;吸力面安装叶片端导叶弱化了泄漏涡的强度但没有减小泄漏涡的作用范围。     

前缘弯掠斜流转子叶顶间隙流动特性数值分析

本文对前缘弯掠斜流转子叶顶间隙内的流动特性进行了数值分析。结果表明:叶顶间隙气流与主流发生卷吸而生成泄漏涡。泄漏涡作用的区域具有较低的压力分布。在叶片通道内,泄漏涡沿着与转子旋向相反的方向朝相邻叶片的压力面移动。大间隙时的泄漏涡比小间隙时强烈。低流量时泄漏涡的作用区域比高流量时大。在各种流量特性下,叶顶尾缘近吸力面区域都存在着二次间隙流。     

}MSo浸种对大麦种子萌发及若干性状的影响

本文报道二甲亚矾(DMSO)浸种影响大麦“早熟3号”种子的萌发以及浸种后种子的渗漏和呼吸强度等的变化.结果表明:在24℃条件干浸种，。.1%和5芳的DMSO明显促进种子的萌发，5劣DMSO浸种的促进作用尤为明显.然而这种影响效应在zs c条件下浸种则完全相反，对种子萌发有抑制作用，表现明显的温度效应.     

Towards cooling of high-intensity ion beams

Buffer gas beam coolers may become excellent beam preparation devices for high-resolution mass separation. The small beam emittance provided makes efficient isobar resolution a realistic goal. In order to fulfill the needs of future facilities providing high-intensity beams of rare isotopes, it is desirable to increase the beam intensity limit of such devices from typically several tens of nanoamperes to microamperes. This requires the usage of high-voltage radiofrequencies in a low-pressure gas environment. A buffer gas beam cooler, dedicated to this purpose, is under development at the NSCL. The study of voltage breakdowns under such conditions and the design of an electrode system minimizing them is mandatory.      

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

Magnetic calorimeter for registration of small energy release

A scheme of magnetic calorimeter for registration of rare events characterized by small energy release (cosmic rays, WIMPs, solitary X-ray quanta) is proposed. The calorimeter is brought to operation by adiabatic demagnetization, and its magnetic response is measured by a quantum interferometer (SQUID, A. Barone and G. Paterno, Physics and applications of Josephson Effect). Special consideration is given to the specific features of calorimeter operation in the ferromagnetic transition region. The trigger registration of ultrasmall energy release by a ferromagnetic system in the metastable state is described.     

The HITRAP project at GSI: trapping and cooling of highly-charged ions in a Penning trap

A decelerator will be installed at GSI in order to provide and study heavy nuclei without or with only few electrons at very low energies or even at rest. Highly-charged ions will be produced by stripping at relativistic energies. After electron cooling and deceleration in the Experimental Storage Ring (ESR) the ions are ejected out of the storage ring at 4 MeV/u and further decelerated in a combination of linear accelerator structures operated in reverse. Finally, they are injected into a Penning trap where the ions are cooled to 4 K by electron cooling in combination with resistive cooling. From here, the ions can be transferred in a quasi DC or in a pulsed mode to different experimental setups. This article describes the technical concepts of this project focused on the Penning trap.      

不良导体导热系数测定实验中仪表风扇对实验结果的影响

根据对物体冷却规律的分析,并从实验结果比较,指出稳态法测不良导体导热系数实验中,设置散热盘的冷却过程应与其在稳态过程时的强迫对流散热方式保持一致.